- Test Chambers
- Laboratory Equipmemts
- Sterilization Equipments
- Clean Room Equipments
- Lab Water Solutions
- Measuring Meter
Ion Specific Meters (Acm-34098-R)
Guidelines:
The water monitor follows national standards which are established based on scientific guidelines such as Guidelines for drinking water quality promulgated by Ministry of Health in 2001,Guidelines for drinking water source (CJ3020-93), Guidelines for groundwater quality (GB/T14848-93), (Standards for water supplied by urban quality (CJ/T206-2005),Standards for surface environmental quality （GB3838-2002）and Standards for fisheries water quality(GB11607-89).
Features-Digital Ions Meters:
- Test fast Immediate results
- High automation,
- Self-recording,
- Self-reserving
- Self-analyzing;
- Print results via the built-in RS-232 connected with PC
- Portable
- Dustproof
- Waterproof
- Anti-chemical erosion.
Technology Specifications:
- Light Source:
- Wavelength Range:
- Wavelengths of
- Display
- Resolution Ratio:
- Wavelength Accuracy:
- Result
- Readout Mode:
- Immediate Result
- Test Tubes:
- Power：
- Working Environment
- LED
- Wavelength Range is 410 - 650nm with optional operating
- 410、500、540、590 and 650nm via built-in filters.
- LCD screen
- 1% FS
- ≤±1nm
- Provides direct reading of test results in mg/l, Readout also available in Absorbance.
- Data installation capacity of at least 99 groups;
- less than 15 minutes.
- φ2*25cm glass tube
- optional， including mains AC electricity supply ( 220 V) 4 AA alkali batteries
- ：0-50°C, no cold agglutination phenomenon in 90% RH
The inst. is used to measure the following parameters within the ranges mentioned
- Parameter
- Range
- Standard limit for 1st grade water quality
- Maximum release concentration allowed for 2nd grade contaminations
- pH
- 6~9
- 6~9
- 6~9
- COD
- 3.0~100
- 20~2500
- 15
- 100 (for ordinary enterprises)
- 60 (senior sewage treatment factories)
- Ammonia nitrogen
- 0.15~6.0
- 0.15
- 15
- N
- Total phosphor (P)
- Copper
- Zinc
- Fluoride (F)
- Arsenic
- Cadmium
- Chrome (VI)
- Cyanide
- Volatile phenol
- Anionic surface active agent (LAS)
- Sulfide
- Sulphate (sulfate radical)
- Chloride (CI)
- Nitrate (N)
- Nitrite (N)
- Iron
- Manganese
- Nickel
- Cobalt
- Phosphate (P)
- Formaldehyde
- Aniline species
- -
- 0~1.0
- 0.01~5.0
- 0.01~1.0
- 0~2.0
- 0~0.5
- 0.001~0.4
- 0.01~0.8
- 0~0.4
- 0.002~1.0
- 0.002~0.275
- 0~0.7
- 2.0~70
- 0.1~25
- 0.1~10
- 0~0.3
- 0.1~3.0
- 0.01~1.0
- 0.05~1.0
- 0.01~2.0
- 0~50
- 0~10
- 0~2.0
- -
- 0.02
- 0.01
- 0.05
- 1.0
- 0.05
- 0.001
- 0.01
- 0.005
- 0.002
- 0.2
- 0.05
- 250
- 250
- 10
- -
- 0.3
- 0.1
- -
- -
- -
- -
- -
- -
- -
- 0.5
- 2.0
- 10
- -
- -
- -
- 0.5
- 0.5
- 5.0
- 1.0
- -
- -
- -
- -
- -
- 2.0
- -
- -
- 0.5
- 1.0
- 1.0
Other Product of Water Testing Equipments
