Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

Water Bath India, Water Bath Manufacturers, Water Bath Suppliers


A water bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. WEIBER water baths are widely used for day to day bacteriological and varied laboratory applications requiring incubation as well as general tests and procedures in variety of research and testing laboratories.

We specialize in both standard and customized models, specifically designed to meet the challenging demands of various test areas.

  1. Versatile usage
  2. Ergonomic Design
  3. Energy Efficient
  4. Long life
  5. Low Maintenance
  6. Calibration And Protocol Documentation
  7. PID temperature controller
  8. water Bath Exporters

  9. Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values.
  10. Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the baths to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
  11. Energy Efficient – the baths uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
  12. Sturdy Construction – the baths are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.
  1. HMI+PLC based controller
  2. Printer report program
  3. RS 232/485 interface
  4. USB ports
  5. Real time data acquisition system
  6. profile control(MULTIPLE PROGRAMMING)
  7. timer (1 to 999min)
  8. Over temperature alarm system.

Water baths are double walled convection heated units. Outer body of our water baths are constructed out of thick PCRC steel sheet/SS 304 (as per request) duly pre-treated with primers for rust proofing and painted with air drying paint/stove enamel/powder coating. The inside chamber of the unit is made of heavy gauge stainless steel sheet of grade ss-304. The unit is provided with top opening cover, made of stainless steel with steel concentric rings.

Heating: Indirect heating system is provided in our water bath, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The temperature is evenly distributed throughout the chamber through natural water convection mechanism, ensuring very good temperature sensitivity.

Temperature Range: Temperature range of our standard water bath models are 5o c above ambient to 90o c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers.

Temperature Sensitivity: Temperature inside our water bath is controlled with a sensitivity of + 0.5o c or better.

Front Panel: Front panel of our water bath comprises of on/off switches heating and mains indicator lamps and temperature controller.

Temperature Control  
Temperature Sensitivity ±0.5°C or better
Spatial Deviation In Temperature ±0.5°C or better
Readability 0.1°C
Temperature range 5°C above ambient to 90°C
Temperature Sensor PT-100
Temperature Controller PID
Display LED/LCD
Adjustable alarm limits Optional
Safety thermostats  
Temperature Sensors PT-100
Automatic temperature setting Yes
Adjustable limits Yes
Timer (999 mins) optional
Program (Real Time) optional
Data Acquisition Program optional
Serial Port (Printer) RS232 optional
Inspection window in door optional
Internal Dimensions 300 x 250 x 150 mm
No. of rows 2
No. of holes 4
Printer Report Program optional
2 x 24 characters LCD Display optional
Access Port 30 mm optional
Power consumption  
Nominal power 500 -650W
Nominal voltage 220-230 Volts, 50 Hz Single Phase
Frequency 50 Hz

The above mentioned sizes are of our standard bath. However we are fully capable to cater to the demand of any customized size for any special application.

  1. Laboratory Applications
  2. Warming of reagents
  3. Melting of substrates
  4. Incubation of cell cultures
  5. Bacterial examination
  6. Crude oil analysis
  7. Food processing
  8. Immunology testing
  9. Protein analysis
  10. Thawing samples
  11. Warming samples
  12. General chemical and biological uses
  • ASTM E715-80
  • ASTM F2473-12
  • BS 619:1935
  • BS 4525:1983
  • ISO 759-1981
Corporate Catalog
Corporate Video
Product Videos
Exhibitions & Trade Fair
Product Gallery of ACMAS