Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

Composite Curing Oven

ovens composite curing oven

COMPOSITE CURING OVEN

WEIBER Composite Curing Ovens are used for curing a wide variety of composite material. They are commonly used in the aerospace and automotive industries.Airflow patterns maximize temperature uniformity throughout the oven and provide rapid ramp rates. Digital controls, and power switching components ensure accurate temperature control. Typical applications include curing filament-wound composites used in products such as light weight pressure vessels, and curing the composite components of wind turbine blades.

High pressure recirculation blower, along with fully enclosed & pressurized supply ducts, delivers heat with a combination airflow arrangement, and ensures the best heat distribution throughout the work chamber, even with varying loads. All units are fully factory tested, adjusted & certified.

  • SPECIAL FEATURES:
  • CONSTRUCTION DETAILS:
  • TECHNICAL SPECIFICATIONS:
  • APPLICATIONS:
  1. Maximum temperature range up to 5000F.(2600C)
  2. Microprocessor based controller (HMI+PLC as an option).
  3. Separate high limit instrument with manual reset provides over-temperature protection
  4. High pressure recirculation blower
  5. Fully enclosed & pressurized supply ducts
  6. Proper air circulation for uniform distribution of temperature throughout the oven.
  7. Internal Chamber made up of corrosion resistant Stainless Steel
  8. Simple calibration and auto-tuning function
  9. LCD/LED display with temperature uniformity of 0.1 deg C
  10. Internal temperature monitoring thermocouple jacks
  11. Timer(Optional)
  12. Touch-button controls allows quick and simple temperature setting.
  13. RS 232/485 interface. (optional)
  14. Universal Digital Data Recorder system(optional)
  15. USB ports for PC connectivity (optional)
  16. Temperature chart recorder/printer for printing graphs(optional)
  1. WEIBER Composite Curing Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade). The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
  2. Temperature control:
  3. The Temperature of Ambient to 500°F is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

  4. Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  5. Features of Coaxial Circulation Fan:

    • Vacuum impregnated stator winding with dr. back varnish under red baktol
    • Non-hygroscopic.
    • Best IR value
    • Bright bar (EN - 8 class) shaft.
    • Bush bearing of branded companies.
    • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
    • Pressure die-casted-rotor manufactured with zero error.
    • Boats of high accuracy
  6. Temperature chart recorder/printer for printing graphs(optional)

    These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

  7. Heating:

    Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

Interior Dimension (W X D X H) 400x 1200 x 600 mm
Maximum Temperature 500° F(2600C)
Temperature Sensor PT - 100
Display LCD/LED
Controller Nano technology based ergonomic controller
Nominal power 1250 -2500 W
Nominal voltage 230 V
Frequency 50/ 60 Hz
  1. Sterilizing
  2. Conditioning
  3. Batch Testing
  4. Preheating Process
  5. Components Processing
  6. Stability Testing
  7. Aging Tests
  8. Glassware Drying
CORPORATE CATALOG
Corporate Catalog
CORPORATE VIDEOS
Corporate Video
PRODUCT VIDEO
Product Videos
EXHIBITION
Exhibitions & Trade Fair
PRODUCT GALLERY
Product Gallery of ACMAS
CERTIFICATIONS
Certifications