Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

Anaerobic Inert Oven Manufacturers, Anaerobic Inert Oven Suppliers India

ovens anaerobic inert oven
  • Anaerobic Inert Oven Manufacturers


WEIBER Anaerobic Oven is specially designed for anaerobic heat treatment or temperature-characteristics testing with non-oxidizing gas such as carbon dioxide or nitrogen. The oven is hermetically sealed to decrease oxygen inside it. An optional oxygen concentration indicator and regulator is available. It allows precise regulation of the oxygen level from 0.5 to 21% (using nitrogen). The equipment includes cooling jacket which can be equipped with optional cooling blower and automatic dampers. The seams of the inner stainless steel walls are welded with argon gas.

It features heating/cooling programmable temperature controller in lieu of optional programmable temperature controller required with cooling blower.

  1. Microprocessor based temperature controls (HMI+PLC as an option)
  2. Hermetically sealed oven to decrease the oxygen concentration inside the oven.
  3. Uses carbon dioxide or nitrogen for anaerobic heat treatment or temperature-characteristics testing.
  4. An optional oxygen concentration indicator and regulator which allows precise regulation of the oxygen level from 0.5 to 21% (using nitrogen).
  5. Equipped with flow meter and pressure gauge.
  6. Digital temperature setting with an accuracy of one degree
  7. Simple calibration and auto-tuning function
  8. Bulk data Storage Capacity/temperature recorder (optional)
  9. Recirculating blower air flow safety switch
  10. Four-tiered safety system for overheat conditions
  11. Corrosion resistant
  12. Equipped with safety devices.
  13. Inner stainless steel walls welded with argon gas.
  14. RS 232/485 connectivity. (optional)
  15. Open and close update on mobile. (optional)
  16. Audible and visual alarms:
    • when preset temperature limit is reached.
    • When each step of any programmed mode is terminated.
    • When low humidity level is detected by the sensor.(optional with humidity control only)
    • When the door is open.
    • change in pressure level.
  17. Data logging system. (optional)
  18. USB ports for pc and printer connectivity. (optional)
  19. Temperature chart recorder/printer for printing graphs. (optional)
  1. WEIBER Inert Ovens are double walled convection heated and cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is of stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our ovens.
  2. Temperature control:
  3. The temperature of Ambient to 677°C is maintained in the oven which is controlled by nanotechnology based microprocessor controller (HMI+PLC as an option).

  4. Air circulation:Triple walled back of unit is fitted with circulation fans for maintaining temperature uniformly throughout the ovens.
  5. Features of Coaxial Circulation Fan:

    • Vacuum impregnated stator winding with dr. back varnish under red baktol
    • Non-hygroscopic.
    • Best IR value
    • Bright bar (EN - 8 class) shaft.
    • Bush bearing of branded companies.
    • Surge comparison testing in fans and pumps eliminates into turn short circulating of the stator.
    • Pressure die-casted-rotor manufactured with zero error.
    • Boats of high accuracy
  6. Temperature chart recorder/printer for printing graphs(optional)

    These self-contained, easy-to-use recorders provide a permanent record of temperatures, using a precise, spiral-wound bi-metallic strip transducer. All models include an on/off switch, locking door and built-in slot for an optional tie-down cable and lock. All include one "AA" battery, pen, starter box of 60 charts and manual. All come standard with one-point NIST traceable Certificate of Calibration.

  7. Heating:

    Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal/Nichrome wires of suitable wattage. The warm air is evenly distributed throughout the oven through efficient motor fans ensuring very good temperature sensitivity.

Interior Dimension (W X H X D)mm 24" x 24" x 24"
Exterior Dimension(W x H x d)mm 55" x 69" x 54½"
Capacity 2500 lbs
Temperature Ambient to 677°C
Temperature Accuracy ±0.1°C
Temperature Sensor Pt - 100
Display LCD/LED
Controller microprocessor controller
Nominal power 1250 -2500 W
Nominal voltage 230 V
Frequency 50/60 Hz
Approx shipping weight 2445 lbs
Fluid CO2 ,N2 gas
Electricity requirements 230V,50/60Hz
  1. Stability Testing
  2. Sterilizing
  3. Conditioning
  4. Components Processing
  5. Aging Tests
  6. Preheating Process
  7. Batch Testing
  8. Glassware Drying
Corporate Catalog
Corporate Video
Product Videos
Exhibitions & Trade Fair
Product Gallery of ACMAS