- Reliable.
- Aesthetically designed
- Energy Efficient
- Long life
- Low Maintenance
- Calibration And Protocol Documentation
Weiber CO2 incubators (Carbon Di Oxide Incubators) are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated.. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our CO2 incubators (Carbon Di Oxide Incubators) The unit is provided with two doors, the inner door is made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with cator wheels for easy movement inside the laboratory. The unit is provided with two stainless steel shelves. The triple walled back of our CO2 incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.
Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage.. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity.
An energy efficient cooling unit is installed in our carbon dioxide Incubators to enable bio chemical demand studies at lower room temperatures. We use ISI marked high end CFC free compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guidelines.
Carbon Dioxide/Air Flow:
Carbon Dioxide gas can be injected inside the chamber of the incubator with the help of a nozzle provided at the bottom of the chamber which is connected to the carbon dioxide cylinder and a flow control valve to regulate the gas intake in the chamber.
Temperature range of our standard bacteriological incubator models are 5o c above ambient temperature to 70o c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers.
Temperature inside our bacteriological incubators are controlled with a sensitivity of + 0.5° c or better.
Illumination:
Our units are provided with door operated illumination system comprising of fluorescent lights.
Front panel of our units comprises of on/off switches heating and mains indicator lamps, temperature controllers/Thermostat
Temperature Control:
Front panel of our units comprises of on/off switches heating, cooling and mains indicator lamps, temperature controllers and voltmeters.
Inner Chamber |
(Capacity) |
(Volume) |
455x610x410 mm |
4.0 Cu.ft |
112 Ltrs |
505x830x415 mm |
6.1 Cu.ft |
171 Ltrs. |
Temperature Control |
- |
- |
Temperature Sensitivity |
± °C |
0.5 or better |
Spatial Deviation In Temperature |
± °C |
0.5 or better |
Readability |
°C |
0.51 |
Temperature range |
°C |
2°C to 70°C (Standard) |
Temperature Sensor |
- |
PT-100 |
Temperature Controller |
- |
Solid State digital Controller/ PID optional |
Display |
- |
LED/LCD |
Adjustable alarm limits |
- |
Optional With PID controller only |
Water quality |
- |
Distilled / Ionized |
Safety thermostats |
- |
- |
Temperature variation Adjustments |
- |
3 (With PID Controllers only) |
Temperature Sensors |
- |
PT-100 |
Automatic temperature setting |
- |
Yes (With PID Controllers only) |
Adjustable limits |
- |
Yes (With PID
Controllers only) |
Light Control |
- |
- |
Readability or Set ability |
% |
10% (optional feature) |
Light intensity (Middle chamber) |
Lux |
As Desired (optional feature) |
Light intensity (Both Sides) |
Lux |
As Desired (optional feature) |
Accessories |
- |
- |
De-icing module |
- |
Optional |
Timer (999 mins) |
- |
Optional |
Program (Real Time) |
- |
Optional |
Data Acquisition Program |
- |
Optional |
Serial Port (Printer) |
RS232C |
Optional |
Inspection window in door |
- |
Optional |
Shelves |
- |
- |
Standard |
- |
3 |
Internal Dimensions |
mm |
Model Specific |
Maximum Permitted load per shelf |
Kg |
25Kg |
Maximum Permitted total load |
Kg |
75Kg |
This is unique module which can be incorporated with our Carbon Di Oxide Incubator to log in temperature and environment related data with a help of a data logger unit which has a pc connectivity by means of RS 232 C interface. This data is then analyzed and formatted with the help of our unique user friendly analysis software to enable the user to get a formatted and analyzed reports of various inputs during the full operation cycle of the equipment. This is an ideal module for pharmaceutical laboratories, process control applications and high research projects where maintaining a viable record of the performance of the equipment is very essential.
- Our system incorporates multiple Devices such as in line process Indicators, environment scanners and temperature or humidity controllers.
- Provides Astech cable for direct interface to any dot matrix or laser printer for online or offline data records printing
- It has Bulk data storage capacity with high data retention life.
- Facility to obtain nicely formatted print our of the logged data or records with proper headers.
- Our system provided facility to program recording interval with various options to suit individual requirements.
- It is provided with the feature to adjust or select baud rate for any serial communication port.
- Our system is provided with user friendly custom developed software which obtains and analyze the data and facilitates the user to generate reports and graphs etc.