Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

Retort Furnace India, Retort Furnace Suppliers, Retort Furnace Exporters

RETORT FURNACE

WEIBER provides various standards as well as customized horizontal retort furnaces for a number of industries, suitable for processes where a controlled or protective atmosphere is necessary. These models can also be laid out for heat treatment under vacuum up to 1100 °C. The furnace chamber consists of a gas tight retort with water cooling around the door to protect the special sealing. Equipped with the corresponding safety technology, retort furnaces are also suitable for applications under reaction gases, such as hydrogen or, in combination with the IDB package, for inert de-binding or for pyrolysis processes.

  • SPECIAL FEATURES
  • OPTIONAL FEATURES
  • CONSTRUCTION DETAILS
  • TECHNICAL SPECIFICATIONS
  • APPLICATIONS
  1. Outside heating with heating elements surrounding the retort
  2. Additional door heater
  3. Compact housing in frame design with removable stainless steel sheets
  4. Welded charging supports in the retort or air-baffle box in the furnace with air circulation
  5. Swivel door hinged on right side with open cooling water system
  6. Port for vacuum pump for cold evacuation
  7. The temperature control unit consists micro-processor based PID controller cum indicator. benefits of using PID controller:
    • Processing speed is high
    • Provides flexibility to alter the system by changing software.
    • Compact in size.
    • Operation and maintenance easier.
    • Maintain precise values
  8. Over temperature limiter.
  9. PCRC sheet body - Powder coated steel body assures corrosion resistant furnace and allows working of chamber at high temperature applications.
  10. Digital output – Target and Performance Output of the furnace operations are in digital format(digits) giving precise reading.
  11. Precise Control of Environmental Parameters-The set/ programmable parameters of thefurnace are precise or have less deviation from original value,thus ensuring correct measurement.
  12. Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values.
  13. Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the furnace to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
  14. Sturdy Construction-WEIBERfurnaces are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.
  1. Profile microprocessor based controller.
  2. HMI+PLC based controller
  3. Temperature chart recorder
  4. Provision for printer
  5. Open and close updated through mobile network.
  6. Vacuum pump
  7. Inert gas provision
  8. Cooling system for shortening process time.
  9. RS 232/485 interface

WEIBER Retort furnaces are Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double walled thick PCRC sheet, duly painted with attractive stove enamel. The inner casing is made of ceramic wall.The unit is provided with single doors (single side opening). This door is provided with magnetic door closer. This door is provided with lock and key arrangement

Heating:

Heating elements are made of kanthal wire.

Temperature Control:

The temperature inside our retort furnaceis controlled through PID controller

Temperature Range:

Temperature range of our standard furnace is 1100°C. however we have the provision to change the temperature as per individual requests.

Voltage:

To work on 220/230V A.C. supply.

Working sizes (customizable)

Muffle size (DxWxH)mm

Temperature

225x100x100

1100°C

250x125x125

1100°C

300x125x125

1100°C

300x150x150

1100°C

300x200x200

1100°C

350x175x125

1100°C

375x175x175

1100°C

325x150x200

1100°C

475x175x175

1100°C

Heating element

Kanthal A-1

Temperature accuracy

+/- 1oC

Power supply

230V/50Hz (1 phase ,3 phase as desired)

Connected Load

As per dimension

Thermocouple

K type

Temperature Controller

PID

Display

LCD/LED

  Safety thermostats

 

Automatic temperature setting

Yes

Adjustable limits

Yes

  1. Annealing
  2. Tempering
  3. Soldering etc.
CORPORATE CATALOG
Corporate Catalog
CORPORATE VIDEOS
Corporate Video
PRODUCT VIDEO
Product Videos
EXHIBITION
Exhibitions & Trade Fair
PRODUCT GALLERY
Product Gallery of ACMAS
CERTIFICATIONS
Certifications