Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

5 Tons Tube Ice Machine Manufacturers, 5 Tons Tube Ice Machine Suppliers, 5 Tons Tube Ice Machine India

cooling equipments 1 to 5 ton tube ice machine


Tube-Ice Machine freeze ice automatically in vertical tubes, momentarily thaw ice loose from the tubes and then cut it into short cylinders with a hole in the center.  The hole is formed during the formation of the ice as a result of the falling film of water freezing inside the vertical tubes.

Tube ice is a kind of hollow cylindrical ice with external diameter28mm, 30mm and length 25~42mm. The hole diameter is usually 5~10mm and it can be adjusted according to ice.

  1. Freezing time of 4-8 hours
  2. Variable-speed start screw type compressor.
  3. Open-ended serpentine coil and evaporative condenser.
  4. Air cooled refrigerated system-Air cooled refrigeration system offer various benefits like
    • low fan power consumption
    • resistant to corrosion and freezing conditions
    • requires very low maintenance
    • Guaranteed long life operation
  5. Micro-processor based Controller (HMI+PLC as an option)
    • Processing speed is high
    • Provides flexibility to alter the system by changing software.
    • Compact in size.
    • Operation and maintenance easier.
    • Maintain precise values
  6. Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values
  7. Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the machine to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
  8. CFC/HCFC-free cooling-The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
  9. Sturdy Construction-equipment’s are built with robustness to withstand stress and strain, giving the it long life and ability to perform in extreme stress environments.
  10. Low Maintenance- WEIBER systems benefit inretaining proper functionality over long period of time.

All refrigeration equipments are made of four key components; the evaporator, the condenser, the compressor and the throttle valve. Ice machines all work the same way. The function of compressor is to compress low-pressure refrigerant vapor to high-pressure vapor, and deliver it to the condenser. Here, the high-pressure vapor is condensed into high-pressure liquid, and drained out through the throttle valve to become low-pressure liquid. At this point, the liquid is conducted to the evaporator, where heat exchanging occurs, and ice is created. 

Weiber Tube Ice Machines are double walled cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner construction is made of stainless steel sheet-304.
Insulation is non-CFC polyurethane foam, bonded to shell and liner for added strength.


An energy efficient cooling unit is installed in our machines. We use high end CFC free compressors of Kirloskar/Tecumseh / Bitzer/ Danfoss make, conforming to latest international standards and guidelines.

frezers refrigerators upto 40 ton block ice machine

The refrigerants used are R404A, R134A, R502, R-407 A/C/F R-22, R-717, R-134a and other HFC’s.

Temperature from 5 to -20°C can be achieved by using R-134A.

The refrigerants are environmental friendly, CFC free and easily available worldwide.

  • Capacity modulation and precision cooling
  • High Energy Efficiency
  • Compact
  • Ozone-friendly refrigerants
  • Proven Technology
  • Wide Voltage Range
  • Superior quality wear resistant part
  • Steel fabricated ACC(air cooled condenser), low vibration, and low noise level.
  • Improved SEER (Seasonal Energy Efficiency Ratio) - improved SEER gives more efficiency.
CAPACITY Size of ice maker (L×W×H)(mm) Size of condenser (L×W×H)(mm)
1 TON/DAY 1400×800×1800


3 TON/DAY 1700×920×2000 1400×1200×1350
5 TON/DAY 1700×1200×2200 1400×1250×1350



Unit Technical parameter
Power supply Voltage/Phase/Frequency 380V/3P/50Hz
  Refrigerant   R22 or R404A
Temperature Ambient temperature 35
Waterinlet temperature 20
Operating power Total running power kW 16.03
Installment power kW 20
Operating power of cutter kW 0.37
Operating power of cold water pump kW 0.55
Compressor Manufacturer Bitzer
Refrigeration capacity Kw 36.4
Operating power Kw 13.51
Compressor COP/EER Kw/kw 2.7
Horse power Hp 25
Condenser Fan power Kw 1.6

Cooling way

Water cooling

Size of water feeding pipe

Weight of unit Operating weight of tube ice maker Kg 1460
Operating weight of condenser Kg 150
Water supply pressure requirement Bar 1
  1. Beverage
  2. Fishing ports
  3. Hotels
  4. Cafes
Corporate Catalog
Corporate Video
Product Videos
Exhibitions & Trade Fair
Product Gallery of ACMAS