Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

Pharmaceutical Sampling Booth Manufacturers Pharmaceutical Dispensing Booth Suppliers Dispensing Booth India

Pharmaceutical Sampling Booth

DISPENSING BOOTH/SAMPLING BOOTH

Dispensing/Sampling Booth provides a safe, HEPA Filtered environment, for the dispensing of hazardous drug powders. Air is pulled away from user thru rear-wall pre-filters, trapping powders; recirculating air through ceiling mounted high efficiency particulate air (HEPA) filter rated 99.99% efficient at 0.3 microns.) protects the operators from toxic chemicals / raw materials used for manufacturing of tablets, medicines, capsules etc from external contamination during the process of weighing or measuring. It is ideal where a high degree of flexibility is desired. Containment is achieved by air movement. The product also known as Pharmaceutical Sampling Booth and Pharmaceutical Dispensing Booth.

  • SPECIAL FEATURES:
  • OPERATING PRINCIPLE:
  • CONSTRUCTION DETAILS
  • TECHNICAL MATRIX
  • APPLICATIONS
  1. Designed in accordance with WHO-GMP.
  2. 3-Stage Filtration like Prefilter , Fine Filter , HEPA filter .
  3. Heavy duty Low noise motor blower assembly .
  4. Suitable to accommodate to floor & table top for keeping weight machine5. Negative pressure inside the booth prevents the escape of fine powder from the work area.
  5. Fully integrated system.
  6. Easy installation & economical.
  7. Stainless steel AISI 304 structure.
  8. Dynamic gasket to guarantee the perfect sealing of the filters.
  9. Down cross is equipped with N°3 fans with AC frequency control.
  10. Corrosion resistant exterior and interior.
  11. Sturdy construction

The air forced downwards is extracted at low level into the booth's filtration system where dust particles are contained at each level of filtration prior to being re-circulated back into the booths' air stream. When the Booths is operating under normal conditions air is pulled through the main working chamber to exhaust grills, normally situated in the rear of the Booths, suppressing air-borne dust away from the operators breathing zone.

All Powder Dispensing / Sampling Booths are available in the following materials of construction depending upon customer’s choice.

  • G.I. with Powder Coated finish.
  • Fully Stainless Steel with satin finish (Gr-304 / Gr-316)
  • polycarbonate curtains
Type Front Open
Direction of flow Vertical
Material of Construction
SS304 / SS316 or G I Powder Coated
Cleanliness Class 100 as per US FED STD 209E (IS 14644-1)
Particle Retention 0.3 micron
Noise Level 65dB
Velocity 120 FPM ± 20%
Illumination Fluorescent tubes diffusers
Light intensity 800 LUX
Power Supply 230V Single Phase, 50 Hz
Motor / Blower assembly Direct drive continuous duty ¼ HP with sealed bearings.
Filters Aluminum framed HEPA filters with a minimum efficiency of 99.99% at 0.3 micron.
  1. Product Dispensing
  2. Large scale dispensing & weighing
  3. Pharma industry
  4. Dispensing of raw materials
  5. Chemical industry
CORPORATE CATALOG
Corporate Catalog
CORPORATE VIDEOS
Corporate Video
PRODUCT VIDEO
Product Videos
EXHIBITION
Exhibitions & Trade Fair
PRODUCT GALLERY
Product Gallery of ACMAS
CERTIFICATIONS
Certifications