Acmas Technologies Pvt.Ltd.- Test Chamber Manufacturers Suppliers & Exporters

Wet Bench India, Wet Process Station Manufacturers, Semi Conductor Wet Bench Suppliers

Wet Bench Exporters


Fume hood wet process are specially designed for the use in semiconductor research and manufacturing where tanks, rinsers, heated baths require control modules. These equipments work with a lower exhaust blower to provide a means of removal of toxic fumes and odors. These equipments have a wide range of applications in several research and development organizations, medical laboratories, or for industrial applications. These equipments also known as Semi Conductor Wet Bench.

These self-contained Wet Processing Cabinets provide the perfect turnkey solution for a wide range of cleaning and processing requirements. This Cabinets also known as Wet Bench.

Available in polypropylene/SS-304 Wet Process Station from WEIBER manufactures both standard and customized microprocessor based Floor standing equipments. The fume hoods with PP construction are FRP lined and epoxy coated.

  • Federal Standard 209e
  • Class 10 cleanliness
  • ASHRAE Standard 110-1995
  1. Incorporates all processing components into one self-contained, easy-to-clean system
  2. Isolated control panel allows safe, convenient operation of baths, rinsers, and other process modules
  3. Select all-polypropylene or 304 stainless steel shell
  4. Standard system includes sliding access shield and fluorescent illuminator
  5. The Wet Processing Stations accommodate up to eight processing modules (rinsing tanks,etching baths, ultrasonic cleaners, hot plates, etc.).
  6. HEPA-filtered laminar flow fume hoods are suitable for use with trace metal applications. These units incorporate a top located filtration system powered by a dynamically balanced motorized impeller for even air distribution and excellent energy efficiency resulting in quiet operation.
  7. Corrosion resistant interiors and exteriors.
  8. Microprocessor based control system

Fume hood wet process are manufactured with all white structural polypropylene/SS-304, which is corrosion resistant. All modular fume hoods are provided with sliding sash made of special grade shatter proof glass duly framed in wooden/ aluminum frame with sliding motion and counter weight balanced mechanism.

Noise and Sound Levels

Our stainless steel fume hoods are designed with lower noise levels and the performance of these fume hoods are comparatively better than the industry standards of 60db, and approximately 15cm distance from the sash.

Volume of exhaust

It is generally known that fume hoods are capable of maintaining a constant exhaust volume.

Illumination levels at work space

Our fume hoods wet process makes sure that a maximum of 800 lux light is available on the work table through diffuser fluorescent light arrangement.

Exhaust assembly

These fume hoods wet process are incorporated with an extremely durable and b exhaust system that generally persists a range of 500-1250 CM. These exhaust assembly comprises of balanced centrifugal impellers that are combined with a heavy duty three phase motor of Crompton greaves.

Exhaust ducting

These fume hoods wet process are also integrated with a FRP ducting of required dimension as per the requirements of the user.

Working sizes

Dimension (length x depth x height)
4’ x 2’ x 2’
5’ x 21/2 x 21/2
6’ x 3’ x 3’

Customizable sizes are also available

Construction: All stress-relieved white polypropylene, 0.5" (13 mm) thick or all 304 stainless steel. Standard plumbing is PVC (specify 304 stainless steel or other desired material).
Exhaust: Ducted through a standard 10" (254 mm)-diameter flange positioned at the top rear of the cabinet (see airflow illustration). Specify other desired flange diameter or location.
Drain: 2" NPT female, located at bottom of sub-deck plenum.
Power: 120VAC, 60Hz or 220VAC, 50Hz, depending on component selection. Power outlets available for process equipment.
Illuminator: 800 lux
Controls: Instrument panel provides power switch, power indicating light, light switch, static pressure exhaust meter, and power fuse. Provisions are made for audible and visible pressure alarm, visible alarm silence, and for control of optional processing baths.
Noise factor 50 dBA
Filter type 99.99% efficient HEPA
Air flow Unidirectional
Air flow control Three step air flow speed controller
Blower assembly Centrifugal lubricated bearing type ISI marked assembly
Power requirements 500 watts -750 watts( model specific)
Nominal voltage 220- 230 volts, 50Hz single phase
  1. Chemical tests
  2. Research and education
  3. Medical laboratories
  4. Industries
Corporate Catalog
Corporate Video
Product Videos
Exhibitions & Trade Fair
Product Gallery of ACMAS