Archive for April, 2015

Water Analyzer

April 28th, 2015

Acmas Technologies water analysers are designed specifically for measuring the quality of water. They are widely used for research organizations, petrochemical industries and for various environmental departments. It is usually the first approach to deal with water quality problems. The dust proofs, water proof, are provided with anti-chemical erosion and are extremely portable. The main features of these devices are they have facilities like self recording, self analysing, and self reserving.

The products are fabricated using high quality raw material. Developed by our team of experts, this analyser will provide a detailed analysis of your water and will help you determine whether you need water treatment.

Features

  • High automation,
  • Self-recording,
  • Self-reserving
  • Self-analysing
  • Print results via the built-in RS-232 connected with PC
  • Portable
  • Dustproof
  • USB communication interface
  • Good Analysis Speed (A Measure of A Sample Just 3 Minutes);
  • Pulse Power Supply.
  • Low Power Consumption (A 9v Battery Can Be Used For More Than 40 Hours.
  • CE and ISO certified
  • Waterproof
  • Anti-chemical erosion

Applications

  • Analysis of steam distillation of water.
  • Analysis of drinking water.
  • Analysis of living water.
  • Analysis of sea water.
  • Analysis of surface water.
  • Analysis of waste water.

Find More: Water Analyzer

Technical specifications

Light source LED
Wavelength range: Wavelength Range is 410 – 650nm with optional operating
Wavelengths of 410`500`540`590 and 650nm via built-in filters.
Display: LCD screen
Resolution ratio: 1% FS
Wavelength Accuracy: ±1nm
Result Provides direct reading of test results in mg/l, Readout also available in Absorbance.
Readout mode: data installation capacity of at least 99 groups;
Immediate result less than 15 minutes.
Test tubes: Ø2*25cm glass tube
Power optional including mains AC electricity supply ( 220 V) 4 AA alkali batteries
Working Environment 0-50°C, no cold agglutination phenomenon in 90% RH

UVC Light Meter

April 8th, 2015

Acmas Technologies UVC light meters are used for wide array of industrial, photography, lab work, architectural, engineering and construction applications for measurement of UV exposure. The best quality raw material used in the manufacturing gives unmatched endurance.

These products are highly appreciated for its accuracy and cost-effectiveness. Some features available for UVC light meters include battery power for greater portability. The durable ergonomic design promotes one-hand, one-touch operation so sample measurements are taken in seconds.

Features

  • Hand held meter with integral sensor
  • Includes protective carry case
  • Powered by only four button cell batteries
  • Portable
  • Separate light sensor allows to take measurement at an optimum position
  • USB Computer interface
  • Low battery indication
  • LCD display can clearly read out even in High Ambient Light
  • High accuracy
  • High reliability and durability
  • metal handle
  • Data Hold
  • spectrum meet C. I. E. standard
  • Large LCD display with analog bargraph
  • Backlight for readings in low light levels
  • Complete with 9V battery, light sensor with protective cover, protective holster, and soft case

Applications

  • Photometric measurements
  • Botanical and agricultural fields
  • Electronic testing
  • Workplace illumination
  • Luminaire manufacturing

Technical specifications

Display Maximum indication 1999
Measurement  ranges and resolution
Lo Range 1999 uW/cm ^ 2  x  1 uW / cm ^ 2
Hi       Range  19990 uW / cm ^ 2  x  10 uW / cm ^ 2
UV sensor spectrum Band pass 290 nm to 390 nm
Buttons. Switch Power button, Zero button, Range switch
Sample Time 1 sec. (approx.)
Sensor Structure Microprocessor structure
Operating Temperature 0 °C to 50 °C
Operating Humidity Less than 85% R. H.

UVC-Light-Meter