- Fully Automatic and safe operation system
- Variable-speed start screw type compressor.
- Open-ended serpentine coil and evaporative condenser.
- Air cooled refrigerated system-Air cooled refrigeration system offer various benefits like
- low fan power consumption
- resistant to corrosion and freezing conditions
- requires very low maintenance
- Guaranteed long life operation
- Micro-processor based Controller (HMI+PLC as an option)
- Processing speed is high
- Provides flexibility to alter the system by changing software.
- Compact in size.
- Operation and maintenance easier.
- Maintain precise values
- Aesthetically designed-Designed according to the standards and principles underlining industry’s aesthetic values
- Corrosion Resistant interior and exteriors-Corrosion resistant coatings like epoxy coatings are applied inside and outside the machine to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
- CFC/HCFC-free cooling-The air cooled refrigerator use CFC (chlorofluorocarbon)-free refrigerants those are ozone friendly and eco-friendly.
- Sturdy Construction-equipment’s are built with robustness to withstand stress and strain, giving the it long life and ability to perform in extreme stress environments.
- Low Maintenance- WEIBER systems benefit inretaining proper functionality over long period of time.
All refrigeration equipments are made of four key components; the evaporator, the condenser, the compressor and the throttle valve. Ice machines all work the same way. The function of compressor is to compress low-pressure refrigerant vapor to high-pressure vapor, and deliver it to the condenser. Here, the high-pressure vapor is condensed into high-pressure liquid, and drained out through the throttle valve to become low-pressure liquid. At this point, the liquid is conducted to the evaporator, where heat exchanging occurs, and ice is created.
All refrigeration equipments are made of four key components; the evaporator, the condenser, the compressor and the throttle valve. Ice machines all work the same way. The function of compressor is to compress low-pressure refrigerant vapor to high-pressure vapor, and deliver it to the condenser. Here, the high-pressure vapor is condensed into high-pressure liquid, and drained out through the throttle valve to become low-pressure liquid. At this point, the liquid is conducted to the evaporator, where heat exchanging occurs, and ice is created.
Weiber Ice Flaker Machines is double walled cooled units. Outer body are constructed out of thick PCRC, pre coated corrosion resistant GI sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated.The inner construction is made of stainless steel sheet-304. The 100 mm gap between the walls is filled high grade polyurethane insulation, which ensures maximum thermal efficiency.
Cooling:
An energy efficient cooling unit is installed in our machines. We use high end CFC free compressors of Kirloskar/Tecumseh / Bitzer/ Danfoss make, conforming to latest international standards and guidelines.
Features:
- Capacity modulation and precision cooling
- High Energy Efficiency
- Compact
- Ozone-friendly refrigerants
- Proven Technology
- Wide Voltage Range
- Superior quality wear resistant part
- Steel fabricated ACC(air cooled condenser), low vibration, and low noise level.
- Improved SEER (Seasonal Energy Efficiency Ratio) - improved SEER gives more efficiency.
WORKING SIZES
| Description |
Specs.
|
| Design capacity |
50-250kg/24h |
| Refrigeration capacity |
2700Kcal/h |
| Refrigerant |
R404A |
| Total input |
2.67kW |
| Compressor power |
2.25kW |
| Condenser fan power |
0.18kW |
| Power supply |
0.12kW |
| Water pump Power |
0.13kW |
| Brine pump power |
0.016kW |
| Power supply |
3P/380V/50Hz or else |
| Nominal current |
5.3A |
| Cooling mode |
Air cooling |
| Evaporator structure |
Spiral groove |
| Evaporating temp. |
-20°C |
| Condensing temp. |
40°C |
| Flake ice temp. |
-7°C |
| Thickness of flake ice |
1.5-2.2mm |
| Water feeding pressure |
0.1Mpa－0.5Mpa |
| Dia.of water inlet pipe |
5/8" |
| Design ambient temp. |
25°C |
| Design water inlet temp. |
18°C |
| Noise (within 2m) |
68dBA |
| Unit weight |
210 kg |
| Unit dimension (mm) |
1260*740*790 |
| Ice storage capacity |
300 kg |
| Ice storage dimension (mm) |
1320*980*1200 |
- Super markets
- Hotels
- Hospitals
- Schools
- Ice cream shop
- Buffet Restaurant
- Fsh Shops
