The unit has outer chamber, Boiler, Lid and Jacket - all made of 304-grade stainless Steel. The jacket is made of SS-304 grade stainless steel sheets. For controlling sterilization cycle, a three-way valve or a multiport valve/three way valve - made of S.S./Brass is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand made of mild steel pipes, duly painted with attractive stoving enamel, air drying paint.
Mode of Heating
Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 220 volts single phase 50 cycles.
Working Pressure: The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g( 15 psi - 17 psi )
Pressure Control: The pressure inside our vertical autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient.
Working Temperature:
121° C
Hydrotest Pressure:
2.5 kgf/cm sq.g (35 psi)
STANDARD SIZES:
| (Dimensions) |
| (Dia) x (Depth) |
| 400mm x 600mm (78 Liter) |
| 500mm x 900mm (175 Liters) |
| 550mm x 750mm (187 Liters) |
| 400mm x 1100mm (140 Liters) |
| 500mm x 1200mm (230 Liters) |
| 550mm x 1200mm (295 Liters) |
| 600mm x 1200mm (356 liters) |
| 750mm x 1200mm (500 Liters) |
